App guides

How to Connect Philips Hue Lights to Your Alarm

You can make Philips Hue lights part of your iPhone alarm: pair your Hue Bridge with WakeUp 2day once, then let the lights brighten, change color or flash when an alarm rings. Pairing happens in Settings > Smart Home > Smart Lights, and light automations need WakeUp Pro.

Key takeaways

  • You need a Philips Hue Bridge on the same network as your iPhone, and WakeUp Pro for light automations.
  • Pair in Settings > Smart Home > Smart Lights: find the bridge, press its button, then tap Pair.
  • Wake-up Light brightens your lights as an alarm rings; an alarm with its own Light Action runs that instead.
  • If the alarm rings on the Lock Screen, the lights start when you stop or snooze it.

What the Hue alarm does and who it is for

Once paired, your Hue lights follow your alarms instead of a fixed schedule. The Wake-up Light turns lights on gradually when the alarm rings, simulating a sunrise, and each alarm can also carry its own light actions. That suits people who get up before sunrise, heavy sleepers who need more than sound, and anyone whose wake time changes from day to day.

Why light helps, and how to choose color and placement, is covered in turning smart lights into a sunrise alarm. This guide is the setup. One thing to know up front: the light starts when the alarm rings, not before it.

What you need

  • A Philips Hue Bridge with your lights already set up in the Hue app. WakeUp pairs with the bridge and controls the lights through it.
  • Your iPhone on the same Wi-Fi network as the bridge, with Local Network access allowed for WakeUp.
  • WakeUp Pro. The Smart Home settings and smart-light automations are part of Pro, which has a 7-day free trial for eligible new subscribers. Start it from the card at the top of Settings.

Hue lights are controlled on your local network, and nothing about them is sent to the developer. To find the bridge in the first place, WakeUp may ask Philips’ discovery service.

How to pair your Hue Bridge

  1. Open Settings > Smart Home > Smart Lights and turn on Smart Lights.
  2. Under Light System, choose Philips Hue.
  3. Tap Find Hue Bridge. If iOS asks whether WakeUp may find devices on your local network, allow it.
  4. When the app reports that it found the bridge, press the button on the bridge, then tap Pair. While pairing, the app keeps waiting for the button press for a short while.
  5. When it shows Connected, open Rooms & Lights. Check a room to control every light in it, or pick individual lights. You can mix both.
  6. Turn on Wake-up Light, choose a Light Ramp for how long the brightening takes, and pick a Light Color: Warm White, Sunrise, Daylight, Soft Orange or Custom.
  7. Optionally, turn on Flash Lights to flash your lights when an alarm fires, and Sleep Dim to dim them gradually when sleep tracking starts.

How to give one alarm its own light actions

The Wake-up Light is the default for every alarm without automations of its own. To treat one alarm differently, say a soft glow on weekends and bright light on workdays:

  1. Open the alarm and scroll to Automations. This section appears once a light system is connected.
  2. Turn on Light Action and choose Turn On, Turn Off, Flash or Set Color.
  3. Set the Brightness and Light Color.
  4. Expand the device picker to choose rooms or lights for this alarm. Leave it empty to control all connected lights.
  5. Tap Add Action to build a sequence, for example a flash, then a warm color. Actions run in order.

An alarm with its own Light Action runs those actions instead of the Wake-up Light, so include everything you want that alarm to do.

Test it, then use it every night

Set a one-time alarm two or three minutes ahead, keep WakeUp open on screen and watch the lights. Then think about where WakeUp will be when your real alarm rings:

  • WakeUp open on screen, for example while it tracks your sleep or shows Nightstand mode: the lights start as the alarm rings.
  • Alarm on the Lock Screen: the lights start when you stop or snooze it.

So if you want the light to help wake you, start sleep tracking or Nightstand mode when you go to bed. Tracking also lets Smart Wake ring a little earlier when you are in light sleep.

Tips

  • Leave the wall switch on. A Hue bulb switched off at the wall cannot respond to anything.
  • Light your side. Picking individual lights lets you leave a partner’s side of the room dark.
  • Start warm. Sunrise or Soft Orange is easy on eyes that have been in the dark; Daylight suits people who need a stronger signal.
  • Keep the sound. Light alone may not wake you. If you sleep through alarms, a flash can add another layer; see alarm tips for heavy sleepers.
  • Use the evening too. Sleep Dim and Light Schedules let the same lights wind down your evening; a smart-home morning routine shows how the pieces fit together.

Troubleshooting

  • The bridge is not found: make sure it is powered and connected to your router, and that your iPhone is on the same Wi-Fi rather than mobile data or a guest network. Check that Local Network access is on for WakeUp in the iOS Settings app under Privacy & Security > Local Network, then tap Find Hue Bridge again.
  • Pairing fails: tap Pair and press the bridge’s button while the app is waiting for it.
  • A light does not respond: check that it works in the Hue app first. A light the Hue app cannot reach will not respond to WakeUp either.
  • The wrong lights come on: an alarm’s own Light Action uses its own device choice, and with nothing chosen it controls all connected lights.
  • The lights came on late: the alarm probably rang on the Lock Screen; see the previous section.
  • No Automations section in the alarm editor: it needs WakeUp Pro and a connected light system.

Where to start tonight

Pair the bridge, check the room nearest your bed, turn on Wake-up Light with the Sunrise color and run a two-minute test alarm. Tonight, start sleep tracking when you go to bed so WakeUp is open when the alarm rings. If you run Home Assistant, the same alarm can also control heating and locks; see using WakeUp 2day with Home Assistant.

Frequently asked questions

Can Philips Hue lights turn on with my iPhone alarm?

Yes, through an alarm app that controls Hue. In WakeUp 2day you pair your Hue Bridge once, and then your lights can brighten gradually, change color or flash when an alarm rings. Light automations need WakeUp Pro. For the lights to start with the sound, WakeUp should be open on screen when the alarm rings, for example while it tracks your sleep.

Does the Hue light come on before the alarm sounds?

No. In WakeUp 2day the wake-up light starts when the alarm rings and then brightens over the Light Ramp time you choose. If you want the room to brighten before the alarm, use the Hue app’s own wake-up automation at a fixed time, or a dedicated sunrise lamp, alongside your alarm.

Why did my Hue lights only come on after I stopped the alarm?

That happens when the alarm rings on the Lock Screen rather than inside WakeUp 2day. In that case the lights start as you stop or snooze the alarm. To have them start with the alarm, keep WakeUp open on screen overnight, for example by starting sleep tracking or Nightstand mode when you go to bed.

Can I use different Hue colors for different alarms?

Yes. Each alarm can have its own Light Action with a brightness, a color and its own choice of lights. Colors come from the presets Warm White, Sunrise, Daylight and Soft Orange, or a custom color. You can add several actions that run in order, such as a flash and then a warm light. Alarms without their own action use the Wake-up Light.